Intelligent, easy to install variable-speed pump.
As an essential component of every swimming pool, the pump maintains water quality by recirculating it through filtration system and the water treatment.
Following years of research, Zodiac® has developed the intelligent, easy-to-install, environmentally friendly FloPro™ VS variable-speed pump.
FloPro™ VS can store up to 8 different speeds over a range from 600 RPM to 3450 RPM. This allows different speeds to be selected for each pool function: normal filtration, backwash, heating, cleaning, water features (slide or waterfall), etc.
|Easy to install|
Easy to retrofit using the exclusive FloPro™ system, enabling the pump to be installed without modifying the plumbing in most installations.
|Ease of Use|
The multilingual user interface is backlit and can be installed remotely, with a kit that allows placement in an accessible, visible place.
|Easy to clean|
Large pre-filter basket (2.6 L), resistant to clogging to preserve the pool filter.
Very low sound level and adjustable speeds from 600 to 3450 RPM.
The motor has electronic protection and frost protection.
With 100% variable speed, the pump can operate for longer periods during the day, at a lower speed. It works silently, and its energy consumption is reduced by up to 90%, while improving filtration efficiency. In this way, water treatment is optimised.
FloPro™ VS is compatible with Zodiac® AquaLink® TRi automation for optimised management of the pool and its equipment. Different speeds can be automatically assigned to each function. Thus, FloPro™ VS pays for itself in three to four seasons, thanks to energy savings (depending on the local cost per kWh).
FloPro™ VS has a high-output motor (> 80% according to IE3 standard). This is a TEFC synchronous motor with permanent magnets, using ECM technology.
|Three Year Warranty|
|Backed by a 3 year warranty (2 years on the mechanical seal) you can be assured of many years of hassle free enjoyment.|
|Power rating||1.65 HP|
|Power supply||220-240 V – 50 Hz|
|Max P1||1.50 kW|
|Max P2||1.23 kW|
|Max Flow||29.5 m3/h|
|Flow at 10 m||24.0 m3/h|
|Max HMT||21.6 m|
|Speeds||- 600-3450 RPM
- 8 speeds can be saved
|Unit protection rating||IPX4|
|Outlets||- Dry contacts, external activation, speeds 1-4.
- RS485 control for connection to AquaLink® TRI